Easy Solid Installs That Boost Dryer Efficiency & Safety!
Once I saw MagVent I knew this was a great product. Moving a dryer to clean behind it is usually extremely difficult if not impossible due to the vent hose. This product allows easy movement for maintenance or cleaning.
I fabricated this metal shroud for the vent as I had a large hole in the wall and needed to mount the MagVent coupling. -Anthony F.
#DryerVent #Laundry #EnergyEfficiency #FireSafety #HomeImprovement #MagVent #ClothesDryer #Appliances #DIY #SpaceSavings #Dryer
“The kinked vent behind our newly installed compact stacked W/D was hidden from view, and only discovered when the dryer caught on fire. By changing to side-venting the dryer and installing the MagVent, we can now clearly see that we have a better, safer installation. Plus we increased efficiency by eliminating yards of twisting turning vent pipe ~and~ we gained valuable storage space because we were able to push the stack in and over by several inches more than before. Bonus!” Lynor L.
#DryerVent #Laundry #EnergyEfficiency #FireSafety #HomeImprovement #MagVent #ClothesDryer #Appliances #DIY #SpaceSavings #Dryer
“This is a great product! It saves the hassle of the long duct lines. The MagVent MV-180 was easy to install, and the self-aligning magnets are great.” – Wes P.
#DryerVent #Laundry #EnergyEfficiency #FireSafety #HomeImprovement #MagVent #ClothesDryer #Appliances #DIY #SpaceSavings #Dryer
“My MagVent MV-180 Installation is completed, and works perfectly. It could not have been easier. The before and after pictures speak for themselves.
We are doing a major remodel of our lower level, and both carpenter and tile contractors remarked how well it looked and worked. They both wanted info on where I purchased it so that they could order also.
Couldn’t be happier with quality and how it works!” -John K.
#DryerVent #Laundry #EnergyEfficiency #FireSafety #HomeImprovement #MagVent #ClothesDryer #Appliances #DIY #SpaceSavings #Dryer
“I just installed the MagVent MV-180, and it was pretty easy. I took my time, and cut away baseboard. It was well worth the money. I have replaced the vent so many times I can’t count. I always had leak issues, and the hose would seem to pop off constantly. Now it should work! I really like that I don’t have to undo a clamp, and reinstall one whenever I have to pull the dryer out.” Bev S.
#DryerVent #Laundry #EnergyEfficiency #FireSafety #HomeImprovement #MagVent #ClothesDryer #Appliances #DIY #SpaceSavings #Dryer
“My wife and I bought a stackable washer and dryer, and converted a closet on the second story of our house into a laundry room. I racked my brain for a long time on how I was going to be able hook them up once in the closet with limited space. At first I tried a regular flexible vent pipe sticking out of the wall, but it was impossible to reach and wouldn’t line up properly. My friend suggested the MagVent MV-180, and with a little maneuvering, once in position the vent snapped right together. I don’t know how I would have done this project without this MagVent. It was a life saver.” -Greg B.
#DryerVent #Laundry #EnergyEfficiency #FireSafety #HomeImprovement #MagVent #ClothesDryer #Appliances #DIY #SpaceSavings #Dryer
“I’ve moved, re-moved, and finally stacked my stupid dryer sooo many times over the years. Thankfully my vent hole was measured exactly, and lines up well – but still needed a somewhat “unconventional” multi-layered vent run, baled together with some electrical wire, to be able to push it in straight without crushing the metal.
I found the MagVent MV-180 when replacing my washer, and knowing I was going to have to move those things again, figured any way to make it easier would make me happier. Your product definitely did so. [I just have to get a new set of 90-degree hoses so I can slide back that last inch or so…]
I tell everyone about it, and even spec it in my architectural drawings [Barefoot Design Group, St. John USVI].” -Ted C.
#DryerVent #Laundry #EnergyEfficiency #FireSafety #HomeImprovement #MagVent #ClothesDryer #Appliances #DIY #SpaceSavings #Dryer
“The MagVent dryer vent is a terrific product that is ideal for making a dryer vent connection with limited space. The magnetic mount allows for a secure/tight connection and is super easy to install. I am super satisfied with this product and I highly recommend it.” Christopher H.
#DryerVent #Laundry #EnergyEfficiency #FireSafety #HomeImprovement #MagVent #ClothesDryer #Appliances #DIY #SpaceSavings #Dryer
“When we first purchased our home, the dryer was hooked up using a flimsy foil duct as you can see in the before photo. I saw an ad for MagVent online and ordered the MagVent MV-90 kit the next day. This is a much cleaner installation and will not trap lint like the foil duct had. The magnetic coupling is also helpful, especially with the tight closet where the washer and dryer are located. Thank you for a great product!” – Eric N.
#DryerVent #Laundry #EnergyEfficiency #FireSafety #HomeImprovement#MagVent #ClothesDryer #Appliances #DIY #SpaceSavings #Dryer
“I installed a MagVent MV-90 recently, and prefer it to the old machine-to-flex-pipe-to-wall method of venting a dryer. I can now push the two machines closer together and pull the dryer away from the wall without worrying about damaging the vent connection.” -Nick D.
#DryerVent #Laundry #EnergyEfficiency #FireSafety #HomeImprovement #MagVent #ClothesDryer #Appliances #DIY #SpaceSavings #Dryer
